How to Unlock ZTE MF920VS WiFi MiFi Router?

1
18

Unlocking services for ZTE MF920VS WiFi MiFi Router is available as our team can provide the correct factory unlock code for all types of ZTE devices. Unlocking of the device is one-time work, but you can enjoy the unlocked device forever. Once the router is unlocked, you can use the default SIM card as well as other.

We provide the unlock code of ZTE MF920VS, means you will unlock your modem by the NCK code only, which does interfere with the system hardware or software, means you will not loose the warranty of the device.

Order Unlock Code of ZTE MF920VS

How to Unlock ZTE MF920VS WiFi MiFi Router?

1. Switch off the ZTE MF920VS.

2. Remove the default SIM card of the device.

3. Insert any other operator SIM card.

4. Switch On the ZTE MF920VS.

5. Connect to PC with USB cable / WiFi.

Note: If connected through USB cable, then open Computer >> Virtual CD-ROM. Run the setup file to install the drivers and software which are required to run the ZTE MF920VS.

Note II: If you are unable to find the Virtual CD-ROM under Computer then reset the router and try again.

6. Once everything will be done properly, default webpage of the router (192.168.0.1) will be opened automatically.

7. The default webpage of the ZTE MF920VS will redirect you to the login page.

8. Login to the router with admin privilege.

9. It will redirect you to the unlocking page.

Note III: If the device does not redirect to the unlocking page then check the NCK option under Settings.

10. You will get an NCK box.

11. Type the correct code which is provided by sim-unlock.routerunlock.com.

12. Click Apply/OK.

Your ZTE MF920VS may be rebooted to display the network.

From now onwards you can use the default SIM card as well as other operator SIM cards.

Order NCK of ZTE MF920VS

1 COMMENT

  1. I really want to commend you guys for job welldone. I contacted your support on whatsapp on SAT 05 JAN 2019 and i can say i was very impressed with your service even when i was scared to make payment at first. I got a bulk ZTE MF920VS unlock software from you guys which worked but my challenge is that I can still see the MTN page on the device and it doesnt work with a NTEL 4G sim.
    My friend went and unlock the same device with someone else which he didnt want to tell me but that one worked well and it works with NTEL 4g. So please guys look into this and see if it can be corrected because i dont want it showing MTN and i want it to work with NTEL. Mine shows Limited service.

    Thanks

Leave a Reply